Aquarino KH — User Manual · Printed from manual.aquarino.com.br/en/kh/3-app-account-and-wi-fi/

PART IInstall
CHAPTER 3

App, account and Wi-Fi

Everything you do with the Aquarino KH happens through the Aquarino app, available for Android and iPhone. It is how you add the equipment, follow the measurements and change settings — at home or anywhere else.

3.1 Installing the app

Search for Aquarino in your phone's app store and install it. The same app serves the whole product line — Aquarino KH, Controller and Display.

3.2 Creating your account

When you open the app for the first time, tap Create an account and fill in:

FieldWhat to enter
Name and SurnameHow you want to be identified in the app
TelephoneWith the country code. Used by support to reach you
EmailAn address you actually check — this is where the activation PIN and every equipment alert will arrive
Password and Confirm passwordSee the requirements below

Password requirements

  • 8 to 60 characters;
  • at least one uppercase letter;
  • at least one lowercase letter;
  • at least one number;
  • at least one special character.

The app shows the requirements on screen and ticks each one off as you type.

3.3 Activating the account

Once you have signed up, you receive a 6-digit activation PIN by e-mail. On the Activate account screen, type the code into the six boxes and tap Activate account.

3.4 First sign-in

On your first sign-in the app offers two optional features that are worth enabling:

FeatureWhat it is for
Enable biometric lockRequires your fingerprint or face to open the app. Recommended, since the app commands equipment on your aquarium
Enable push notificationsAlerts arrive straight on the phone, in addition to e-mail. It is the fastest way to learn about an off-target KH or an empty reservoir

Once you have chosen, tap Start app.

3.5 Adding your Aquarino KH

The app has a wizard that handles the whole process: it talks to the equipment, hands over your Wi-Fi password and registers it in your account. Six steps, a few minutes.

3.6 Before you start

  • The Aquarino KH should be assembled and plugged in (Chapters 2 and 4);
  • Have your Wi-Fi network name and password at hand;
  • Stay close to the equipment during the process;
  • Confirm your network is 2.4 GHz — see section 3.9.

3.7 The wizard, step by step

1 · Device type

Choose Aquarino KH from the list of devices.

2 · Prepare your device

The app asks you to switch the equipment on and wait for two signals: first the startup beep, then confirmation that the green Wi-Fi LED is blinking. That blinking is what tells you the Aquarino KH is ready to be configured.

The screen itself shows the three LEDs for you to check — CPU, Disk and WiFi — and asks whether the green one is blinking. If it is, carry on. When switched on, the equipment first spends up to a minute trying a network it already knows; only then does the LED start blinking. On new equipment, just wait that minute.

3 · Connect to Aquarino

The equipment creates a temporary Wi-Fi network called AquarinoKH, and the app lists it under *Available networks*. You need to connect your phone to it:

  1. Tap Open Wi-Fi Settings — the app takes you straight to your phone's settings.
  2. Select the AquarinoKH network.
  3. Return to the app and tap I am connected.

4 · Network

Back in the app, the Network screen asks you to pick the network the equipment will use day to day. Choose your Wi-Fi network from the dropdown, enter the password and tap Configure.

5 · Configuring

The app sends the settings and the equipment restarts to join your network. The screen shows a countdown of about five minutes — the time the Aquarino KH needs to reboot and connect.

6 · Done

The final screen confirms: _"Enjoy your new KH."_ Tap Done.

The Aquarino KH appears in your device list and starts reporting. From here on you can reach it from anywhere, without being on the same network.

3.8 If the connection is not confirmed

The wizard warns you when it cannot confirm that your phone is on the equipment's network. Work through this list:

SituationWhat to do
The phone switched back to your home network on its ownSome phones change networks automatically when they detect the current one has "no internet". Turn that automatic switching off in Wi-Fi settings and connect again
The temporary network does not appearConfirm the Wi-Fi LED is blinking; it starts up to a minute after the beep. If the equipment has already been connected to a network that is still on the air, it joins that network instead of opening the temporary one: to change networks, use Wifi Settings on the System screen (section 23.1)
The network appears but will not connectMove the phone closer to the equipment and try again
Setup finished, but the equipment is not in the listThe network password may have been mistyped, or the signal where the equipment sits is too weak. Repeat the process, checking the password

3.9 Requirements for your Wi-Fi network

RequirementDetail
2.4 GHz onlyThe Aquarino KH does not connect to 5 GHz networks. If your router is dual-band, use the 2.4 GHz band — on many models it is enough to create a separate network name for it
Signal above 50%Below 50%, the app warns that the signal is weak. Weak signal is the most common cause of dropouts after installation
Name without special charactersAvoid spaces and accents in the network name. Rename it if necessary

Understanding signal strength

BandPercentagedBmSituation
Excellent80–100%−30 to −50Ideal for connection
Good60–80%−50 to −60Stable connection
Fair50–60%−60 to −67Acceptable, may fluctuate
Poorbelow 50%below −67Connecting not recommended