Aquarino KH — User Manual · Printed from manual.aquarino.com.br/en/kh/15-alkalinity-doser-setup/

PART IIIAutomatic correction
CHAPTER 15

Alkalinity Doser: setup

Corals consume alkalinity — KH — all the time: more during the day, with the lights on, and less at night. The Alkalinity Doser gives back to the aquarium what was consumed and keeps KH close to the target you chose, without letting the value rise or fall suddenly.

It is an external dosing pump connected to the panel's KH Buffer port, set up in Configuration → Alkalinity Doser. It works with any alkalinity product — 3-in-1 balling, All-For-Reef, alkalinity-only buffer — and the equipment does not ask which: it sees the result in its own measurement.

The product's path: the bottle, the dosing pump connected to the KH Buffer port, and the aquarium. The Aquarino KH measures the aquarium water and decides how much the pump doses.
The product's path: the bottle, the dosing pump connected to the KH Buffer port, and the aquarium. The Aquarino KH measures the aquarium water and decides how much the pump doses.

When you open the screen, the top shows a guide to the doser itself: Automatic alkalinity replacement, with a summary of the cycle and the How it works button, which shows or hides the rest. It starts open and sums up, in a few lines, what this chapter explains in detail:

Part of the guideWhat it showsWhere it is in the manual
HOW TO USE — CHOOSE YOUR SETUPThe doser replacing the alkalinity, or as the calcium reactor reserveSection 16.2
HOW IT WORKSMeasures every hour, works out consumption, corrects and doses right after each measurementSections 16.1 and 15.1
PROTECTIONSDaily maximum, above the target and no measurementSections 15.2 and 16.4
BEFORE TURNING IT ONCalibrate the pump, enter the mL to raise 1 dKH, fill the reservoir, choose the daily maximum and set the daily dosing limitSections 15.2 and 15.3 to 15.5
The top of the Alkalinity Doser screen: the guide with the usage setups, the four steps of how it works, the protections and what to do before turning it on.
The top of the Alkalinity Doser screen: the guide with the usage setups, the four steps of how it works, the protections and what to do before turning it on.

Right below the guide are the controls:

The controls of the Alkalinity Doser screen: correction mode, notification, reservoir, mL to raise 1 dKH, maximum daily correction and daily dosing limit, with what has already been corrected and dosed in the last 24 hours.
The controls of the Alkalinity Doser screen: correction mode, notification, reservoir, mL to raise 1 dKH, maximum daily correction and daily dosing limit, with what has already been corrected and dosed in the last 24 hours.

15.1 Correction mode

The mode turns the doser on and sets how gently it corrects towards the target. Both modes replace consumption the same way.

ModeOn screenWhat it does
NoneOffDoes not dose
NormalGentleCorrects towards the target by up to half the maximum daily correction per day
FastAt the limitCorrects towards the target by up to the whole maximum daily correction per day

15.2 The limits of each day

The doser has two daily limits, which you set on the screen. They do different things:

FieldWhat it limits
Maximum daily correctionOnly the approach to the target: how much KH may change in one day to get there. Replacing consumption, including a drop over the last few hours, is left out of this count
Daily dosing limitEverything the pump delivers in 24 hours, consumption replacement and correction added together. It is the safety ceiling and, with KH below the target, what holds back the speed of the rise

Maximum daily correction

This is how much KH may change in one day in the correction towards the target, not counting consumption replacement. It goes from 0.15 to 1.00 dKH per day, and the factory default is 0.15, the most cautious value. Below the field, Corrected in the last 24 h shows how much of the correction has already been used.

Below the value, the screen shows a guide by coral type. It does not lock anything: you choose any value in the range, and the screen shows which type of corals it suits.

The guide by coral type that the screen shows below the maximum daily correction.
The guide by coral type that the screen shows below the maximum daily correction.
Coral typeDaily maximumFor whom
SPSup to 0.20 dKHMostly small-polyp stony corals
Mixedup to 0.30 dKHAquariums with SPS, LPS and soft corals together — a good starting point for most
LPSup to 0.50 dKHMostly large-polyp stony corals and soft corals
Above recommendedabove 0.50Above the guidance, for when you are watching the aquarium closely

Daily dosing limit

This is the total the doser may deliver in any 24 hours, consumption replacement and correction added together. It is your aquarium's most important protection: if the device stops seeing KH change — a faulty probe, a wrong calibration, a wrong value in mL to raise 1.0 dKH —, the doser may think it needs to dose a lot, and the daily dosing limit does not let it, even with the wrong reading.

The default is 1.0 dKH per day, and the field accepts 0.1 to 10.0. Below the value, the screen shows how much it represents in millilitres per day and, under Dosed in the last 24 h, how much has already left the pump. This count, like Corrected in the last 24 h, adds up the measurements of the last 24 hours, not of the calendar day.

When the total of the last 24 hours reaches the maximum, the doser pauses until the oldest doses leave the 24-hour window, and the device keeps measuring. You find out in three ways: a line in the event log, an e-mail — even with notifications turned off — and the message Daily dosing limit reached. Consumption rose or another replacement failed. on the screen. When the window frees up, the doser resumes on its own.

A wrong reading for two days: the daily dosing limit holds the dose back, and KH returns to target when the reading returns to normal.
A wrong reading for two days: the daily dosing limit holds the dose back, and KH returns to target when the reading returns to normal.

15.3 What you need to set up

  1. Calibrate the pump, so the device knows how much product comes out (section 15.4).
  2. Enter the mL to raise 1 dKH for your product in your aquarium (section 15.5). The field comes from the factory set to 1 mL, which suits no product: without the right value, the doser does not dose properly.
  3. Enter the bottle size, in Capacity, to keep track of how much is left.

15.4 Calibrating the pump

Calibrating the pump is what makes an order to "dose 25 mL" actually deliver 25 mL. Doser tubing loses flow with use, so it is worth repeating this from time to time.

On the Alkalinity Doser screen, in the Reservoir block, tap Calibration: the panel opens right there, with three steps:

Step 1 · Fill the tubing

Click Purge and let the pump run until the tubing is completely full of buffer, with no bubbles. Click Stop when done.

Step 2 · Measure what the pump delivers

  1. Put the end of the tubing into a graduated container — a cylinder, syringe or measuring cup.
  2. Click Start Calibration. The pump will run for 60 seconds.
  3. Measure the volume delivered and enter it in Volume Measured, in millilitres.

Step 3 · Check

Adjust the Dosing rate and click Test. The equipment should deliver 5 mL of buffer.

If it deliveredWhat to do
More than 5 mLLower the dosing rate and test again
Less than 5 mLRaise the dosing rate and test again
5 mLDone. The pump is calibrated

15.5 Telling it what your product yields

With the pump calibrated, the equipment still needs to know what your product yields. The mL to raise 1.0 dKH field is what turns "dose 0.25 dKH" into millilitres: it wants the volume, in mL, that raises your whole system by 1 dKH.

To work it out you need two numbers — the product's yield and the real water volume of your system.

Balanced — calcium and alkalinity in one bottle

ProductSolutionFor 1 dKH in 100 L
Tropic Marin — All-For-Reef Powderpowder: 160 g to 1 L16.7 mL
Tropic Marin — Carbo-Calciumpowder: 140 g to 1 L16.7 mL
Tropic Marin — All-For-Reefready-mixed liquid17.85 mL
Fauna Marin — Ready2Reefready-mixed liquid17.85 mL
Barrak — ONEpowder: 150 g to 1 L≈ 17.85 mL
Aviv Reef — Total Reefready-mixed liquid≈ 17.85 mL

Alkalinity only

ProductSolutionFor 1 dKH in 100 L
Triton — Core7 Base Elements 2ready-mixed liquid5.1 mL
Barrak — BUFFERBarrak solution6.25 mL
Barrak — Balling B (KH)ready-mixed liquid6.3 mL
Brightwell — Alkalin8.3ready-mixed liquid8.5 mL
Seachem — Reef Carbonateready-mixed liquid8.9 mL
ESV — B-Ionic Alkalinityready-mixed liquid12.8 mL
Aquaforest — KH Plusready-mixed liquid20 mL
Fauna Marin — Balling Light Carbonatepowder: 100 g to 1 L20 mL
Red Sea — Foundation B (KH)ready or powder 100 g/L29.4 mL
Triton — CO3ready-mixed liquid33 mL
Tropic Marin — Original Balling Bpowder: 76 g to 1 L35.7 mL
Aquaforest — KH Bufferpowder: 80 g to 1 L38.5 mL
Seachem — Reef Builderpowder: 40 g to 1 L71 mL
MBreda — Reef Basis Bpowder: 50 g to 1 L71 mL
Alkalinity dosing calculator

How many mL of your product raise 1 dKH in your system — 20 products from 7 makers.